Bulwark Men's Tall Midweight CoolTouch® 2 FR Deluxe Coverall CMD6T-NEW
Men's Tall Midweight CoolTouch® 2 FR Deluxe Coverall CMD6T-NEW
Color
Size
Quantity
minimum quantity: x available in bundles of: x Product ordered in bundles.
Description
Print Quality
More Images
- 7 oz./yd², 48/37/15 modacrylic/lyocell/aramid
- Navy is 47/37/16 modacrylic/lyocell/aramid
- Two-piece, topstitched, lay-flat collar
- Two-way, concealed Nomex® taped brass break-away zipper, concealed snap at top of zipper and at neck
- Concealed adjustable snap closure on sleeve
- Elastic waist inserts
- Two front swing pockets, two patch chest pockets with flaps and concealed snap closure, two patch hip pockets, left sleeve pocket, rule pocket
- Deep-pleated action back
- Side vent openings with snap closure
This flame-resistant garment meets the requirements of NFPA 2112, Standard on Flame-Resistant Garments for Protection of Industrial Personnel Against Flash Fire, 2018 Edition
Protection: Arc Rating ATPV 9.0 calories/cm² (KH + GY)
Arc Rating ATPV 11 calories/cm² (NV)
Regular sizes available under style CMD6-NEW
Decoration Disclaimer
Embroidery designs over 15,000 stitches will be charged an additional $.50 per 1000 stitches above standard price.
Here at Visual Ink we offer screen printed heat transfers. We do not use a traditional screen-printing press, as transfers offer an alternative to direct screen printing. The transfer is applied to the final substrate using a commercial grade heat press, heat press marks may be visible but normally disappear after the first wash.
Our standard process is the Direct to Garment printing method. We use Kornit printers for all DTG related prints.
DTG is a water-based ink technology that prints directly onto a shirt, much like printing on paper. There is no order minimums and no limit to the number of colors in your design. However, when choosing the colors for your artwork, it’s important to note that they may look different on a real product than what you see on your computer monitor. For more information on how to setup your artwork, visit our Frequently Asked Questions Page.
Because of this, we can’t guarantee color accuracy 100%. Consider the following factors:
- When printing on garments, it’s important to consider fabric material and garment color. The same color value will look a little different on 100% cotton vs. a fabric blend. Similarly, the same color value will look different when printed on a light vs. dark colored garment.
- We also print a white under base layer underneath our prints so that the colors look vibrant and stand out from the fabric.
- Due to the nature of the printing process, some prints could show tiny pinholes in the ink. This is normal as the shirt fibers tend to stand up through the ink during the curing process. Our ink is transparent so printing on bright neon colors, such as safety orange and neon orange, the color of the shirt could migrate into the ink during the printing process and discolor the artwork.
- DTG will have a different look and feel when compared to screen printing. These two techniques use different inks and curing processes.
Approval acknowledges you have read and agree to what’s listed within this document.
Size Guide
| L | XL | 2XL | 3XL | |
|---|---|---|---|---|
| Chest Circumference | 54 1/2 | 58 1/2 | 62 1/2 | 66 1/2 |
| Inseam | 30 3/4 | 30 1/2 | 30 1/4 | 30 |
| Sleeve Length (From Center Back) | 36 3/4 | 37 1/4 | 37 3/4 | 38 1/4 |


