AllMade Unisex Long Sleeve Recycled Blend Tee AL6204

Unisex Long Sleeve Recycled Blend Tee AL6204

Color

Size

Quantity

Description
Print Quality
More Images

This tee is for Mother Nature's biggest fans. We take cotton scraps from the cutting room floor, add in 50% recycled poly and then stay true to the original t-shirt color by not re-dying it, which saves water usage and energy.

4.5-ounce, 50% recycled cotton/50% post-consumer recycled polyester, 30 singles
60% recycled cotton/40% post-consumer recycled polyester (Remade Grey Heather)
This product's carbon footprint has been measured and reduced through a combination of preferred materials and investing in carbon offset projects though the ClimeCo Certified Product Program
1x1 rib knit neck
Shoulder-to-shoulder taping
Side seams
1x1 rib knit cuffs
Recycled tear-away label

Decoration Disclaimer

Embroidery designs over 15,000 stitches will be charged an additional $.50 per 1000 stitches above standard price.

Here at Visual Ink we offer screen printed heat transfers. We do not use a traditional screen-printing press, as transfers offer an alternative to direct screen printing. The transfer is applied to the final substrate using a commercial grade heat press, heat press marks may be visible but normally disappear after the first wash.

Our standard process is the Direct to Garment printing method. We use Kornit printers for all DTG related prints.

DTG is a water-based ink technology that prints directly onto a shirt, much like printing on paper. There is no order minimums and no limit to the number of colors in your design. However, when choosing the colors for your artwork, it’s important to note that they may look different on a real product than what you see on your computer monitor. For more information on how to setup your artwork, visit our Frequently Asked Questions Page.

Because of this, we can’t guarantee color accuracy 100%. Consider the following factors:

When printing on garments, it’s important to consider fabric material and garment color. The same color value will look a little different on 100% cotton vs. a fabric blend. Similarly, the same color value will look different when printed on a light vs. dark colored garment.
We also print a white under base layer underneath our prints so that the colors look vibrant and stand out from the fabric.
Due to the nature of the printing process, some prints could show tiny pinholes in the ink. This is normal as the shirt fibers tend to stand up through the ink during the curing process. Our ink is transparent so printing on bright neon colors, such as safety orange and neon orange, the color of the shirt could migrate into the ink during the printing process and discolor the artwork.
DTG will have a different look and feel when compared to screen printing. These two techniques use different inks and curing processes.